Epson StylusPro10000 - Manual (Page 32)

1-14
1-14 | Setting Up the Printer
5. At the first screen, click Continue . The following dialog box appears:
6. Click the Install button, then click Continue on the next screen.
7. Follow the instructions to install your software and select a default paper
size. When you see a message informing you that installation is
complete, click
Restart to restart your Macintosh.
8. After your Macintosh restarts, select Chooser from the Apple menu.
If you’re going to be sharing the printer on an AppleTalk ® network, skip
the rest of these steps. Instead see “Setting Up on a Macintosh Network”
on page 1-17 to finish configuring the printer.
9. Click the SPro 10000 or SPro 10000CF icon, then click the icon for
your USB port.
Note
If you’re on an AppleTalk
network and the
AppleTalk setting in the
Chooser is Active, you
may see an alert
message when you click
the USB port icon. Make
the AppleTalk setting
Inactive, then select the
USB port icon. If you’re
using your Macintosh in
an Ethernet environment,
you can leave the
AppleTalk setting Active.
SPro 10000 identifies
the driver for the
Photographic Dye
Ink model, and SPro
10000CF identifies the
driver for the Archival
Ink model.