Loading the roll paper, Loading the roll paper -6 – Epson StylusPro10000 User Manual
Page 24
Advertising
1-6
1-6
|
Setting Up the Printer
3. Place the black end of the spindle into the corresponding left mounting
bracket inside the printer.
Loading the Roll Paper
Follow these steps to load the roll paper for printing:
1. Press the
Paper Source
button on the control panel until the
Roll
Auto
Cut
light comes on.
Note
When you remove the
spindle, lift the left end
out first. See page 2-8 for
details on removing paper
from the spindle.
Note
To avoid feeding excess
paper, make sure you
don’t select Sheet when
you’re using roll paper.
Advertising