Epson StylusPro10000 - Manual (Page 22)

1-4
1-4 | Setting Up the Printer
Loading the Roll Paper
Loading roll paper involves three steps: attaching the roll to the paper
spindle, inserting the spindle in the printer, and loading the paper for
printing. Before you begin, remove the paper from its box and remove the
plastic cap and protective covering. Then locate one of the paper spindles
that was packed in your printer box.
Attaching the Roll to the Paper Spindle
Follow these steps to attach the roll to the spindle:
1. Slide the movable paper stop (flange) off the left end of the spindle.
2. Position the roll so the paper unwinds as shown:
3. Slide the roll onto the spindle so it fits securely against the fixed paper
stop.
4. Slide the movable paper stop back onto the spindle and insert it into the
end of the roll. Make sure that it is firmly fixed into the left end of the
paper roll.
Note
Avoid touching the
printable surface of
the paper as much as
possible. Oils from
your skin can affect
print quality.