Epson StylusPro10000 - Manual (Page 116)

5-12
5-12 | Monitoring and Configuring the Printer
Setting the Control Panel Language
All control panel messages are displayed in English. However, you can use a
special printer maintenance mode to change to any of the following
languages:
• French
• Italian
• German
• Spanish
• Portuguese
Make sure the printer is turned off, then follow these steps to change the
language for control panel messages:
1. Press and hold the Pause button while you press the Power button to
turn on the printer. HEX DUMP=PRINT appears on the display.
2. Press the Item button until LANGUAGE=ENGLISH* is displayed.
3. Press the + or – button until the language you want is displayed.
4. Press the Enter button to select the language.
5. Press the Power button to turn the printer off and exit maintenance
mode.
Note
The maintenance mode
also includes a MW7=A
setting, for use by an
authorized EPSON
servicer only.