Epson StylusPro10000 - Manual (Page 23)

1-5
Setting Up the Printer | 1-5
Inserting the Paper Spindle in the Printer
Follow these steps to insert the spindle in the printer:
1. Open the roll paper cover. Position the spindle so that the white end
(with the wide fixed paper stop) is on the right.
2. Insert the white end into the right mounting bracket inside the printer.
You can use either the upper or lower bracket.
Note
You can have two rolls of
paper in the printer at the
same time, and print on
either one. If you have
two rolls, make sure to
wind one of the roll paper
belts that came with your
printer around the end of
the roll you’re not using.
See page 2-7 for more
information.
white
black