Epson StylusPro10000 - Manual (Page 148)

7-12
7-12 | Resolving Problems
4. Carefully pull down the jammed paper. TURN PWR OFF AND ON is
displayed on the control panel.
5. Close the lower cover, if necessary, then press the Power button to turn
the printer off. Press it again to turn it back on.
6. Make sure the Paper Out light is on and LOAD PAPER is displayed on
the control panel. Then reload your paper.
Uninstalling and Reinstalling the Printer
Software
If you need to uninstall and then reinstall the printer software for any reason,
follow the instructions in the appropriate section below.
Macintosh
1. Insert your printer software CD-ROM. Then double-click the
CD-ROM icon to open it, if necessary.
2. Double-click one of the following icons:
• Printer Driver Installer Photographic Dye , if your printer is the
Photographic Dye Ink model.
• Printer Driver Installer EPSON Archival Ink , if your printer is the
Archival Ink model.
Note
If you have two rolls of
paper installed, make
sure you secure the roll
that you are not using
with the roll paper belt.
See page 2-7 for more
information.