Installing the new cutter blade, Installing the new cutter blade -13 – Epson StylusPro10000 User Manual
Page 129
Advertising
6-13
Maintaining and Transporting the Printer
|
6-13
7. Carefully remove the cutter blade from the printer.
Installing the New Cutter Blade
After you have removed the used cutter blade, you’re ready to install the new
one. Follow these steps:
1. Remove the new blade from its package.
2. Make sure the spring coil is inside the cutter holder. If necessary,
reinstall the coil.
3. Fully insert the new blade into the paper cutter holder in the direction
shown below.
Advertising