Playback issues – Nikon KeyMission 80 User Manual
Page 93
77
Troubleshooting
Playback Issues
Saving images
takes time.
It may take more time to save images in the following situations:
• When the noise reduction function is in operation
• When capturing images using the following functions.
- H (route shooting)
- Easy panorama
- HDR
- F (time-lapse movie)
–
A ring-shaped
belt or rainbow-
colored stripe
appears on the
screen or images.
When shooting with backlighting or when a very strong light
source (such as sunlight) is in the frame, a ring-shaped belt or
rainbow-colored stripe (ghosting) may occur.
Change the position of the light source, or frame the picture
so that the light source does not enter the frame, and try
again.
–
Cannot select a
setting/Selected
setting is disabled.
• Certain menu items are unavailable depending on the
settings. Menu items that cannot be selected are
displayed in gray.
• A function that restricts the selected function is enabled.
–
Problem
Cause/Solution
A
File cannot be
played back.
• This camera may not be able to play back images saved
with another make or model of digital camera.
• This camera cannot play back movies saved with another
make or model of digital camera.
• This camera may not be able to play back data edited on a
computer.
–
Cannot zoom in
on image.
• Playback zoom cannot be used with movies.
• This camera may not be able to zoom in on images
captured with another make or model of digital camera.
• When zooming in on a small-sized image, the
magnification rate shown on the screen may differ from
the actual magnification rate of the image.
–
Nikon Transfer 2
does not start
when the camera
is connected to a
computer.
• The camera is off.
• The battery is exhausted.
• The USB cable is not correctly connected.
• The camera is not recognized by the computer.
• The computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon Transfer
2, refer to help information contained in ViewNX-i.
Problem
Cause/Solution
A