Enviro C-10914 - Manual (Page 36)

Secondary Installation
CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE GLASS DOOR REMOVED.
Important note: When the unit is turned
on for the first time, It should be turned onto
high without the fan on for the first four (4)
hours. This will cure the paint, logs, gasket
material and the other products used in the
manufacturing process. It is advisable to
open a window or door, as the unit will start
to smoke and can irritate some people. After
the unit has gone through the first burn turn
the unit off including the pilot, let the unit get
cold then remove the glass door and clean
it with a good gas fireplace glass cleaner,
available at your local ENVIRO dealer.
See M
AINTENANCE
A
ND
S
ERVICE
on how to remove
door to clean glass.
Figure 54: Log Placement with Rock Wool & Embers.
Figure 55: Appliance Burning.
Figure 53: Log Placement with Rock Wool.
36