Sealey VAG505 - Manual (Page 26)

24
Figure 5.7

If you do not want to proceed with erasing codes, press ESC
button or select NO to exit and return to previous screen.
3) Press the OK button to confirm.
 If the codes are cleared successfully, an “Erase Done!”
confirmation message shows on the display.( Figure 5.7)
Figure 5.7

If the codes are not cleared, then an “Erase Failure. Turn Key
on with Engine off!” message appears. (Figure 5.8)
Figure 5.8
Erase Codes
Erase Failure.
Turn Key on with
Engine Off!
Press any key to continue
Erase Codes
Erase Done!
Press any key to continue .
Erase Codes
DTCs and Freeze Data will be lost
Do you wish to continue?
Yes No .