Epson GT-30000 - Manual (Page 117)

Solving Problems
111
Your scanned image is blurred or
distorted.
■ Check the position and
condition of your document.
Make sure the document is
placed flat against the scanner’s
document table glass. If only
part of the image is blurred, part
of your document may be
wrinkled or warped.
■ Make sure the document table
glass is clean.
■ Make sure the scanner is on a
flat, stable surface.
The edges of the document aren’t
scanned.
■ Check the position of your
document. Adjust it so that the
image is within the glass area of
the document table.
■ If colors are patchy or distorted
at the edges of the image, the
document may be too thick, or
there may be outside light
interfering with the scan.