Epson GT-30000 - Manual (Page 31)

Installing the Software
25
4. Make sure the Search for the best
driver for your device and Specify
a location options are selected.
Uncheck the Removable Media (Floppy, CD-ROM...) option, as
necessary, before clicking the Specify a location option. If not
unchecked, the wrong driver may be installed.
5. Browse to EPSON\ English\WINME on your CD-ROM drive. (The example to
the right uses “E” as the CD-ROM drive letter. Your CD-ROM drive letter may
be different.) Click
OK to close the Browse window, and then click Next .
6. Follow the instructions on the screen.
If you see a message asking for your Windows Me CD-ROM, insert it and click
OK (or click Browse and locate the Windows Me source files on your hard drive;
then click OK ).
7. When you see the Screen Calibration window,
move the slider right or left until the stripes
match as closely as possible. (The stripes will
not match perfectly and the recommended
setting is 1.8.) Then click
OK .
The EPSON Screen Calibration Utility
calibrates the preview image you see in your
EPSON TWAIN HS driver to match your
monitor settings.