Epson GT-30000 - Manual (Page 50)

44
Installing the Software
5. Follow the instructions on the screen to
install EPSON TWAIN HS. When
installation is complete, you see the
window on the right. Make sure
SCSI is
selected and GT-30000 appears in the
Scanner Selection list.
6. Click Test to check the connection. If the
scanner software is installed correctly, you
see
Status: Device Ready under Scanner
Information. Click OK to close the
window.
You can test your scanner connection at
any time. (Double-click the
EPSON
TWAIN HS icon in your Windows
Control Panel to open the EPSON
TWAIN HS window. Then click the
Test
button.)