Epson GT-30000 - Manual (Page 129)

Installing the TCP/IP Protocol
123
4. Make sure that Obtain an IP address
automatically is selected and click OK .
(If you need to manually assign an IP
address, contact your Network
Administrator.)
5. Click OK to close the Local Area
Connection Properties screen.
6. Click Close to close the Local Area
Connection screen.
Installing the TCP/IP Protocol on
Windows 98 and Windows 95
1. Open the Control Panel and double-click the
Network icon. If necessary, click the
Configuration tab to display the window on
the right.
2. Check that TCP/IP appears in the list of
installed network components.
If it appears in the list, go to “Assigning an IP
Address for Windows 95 and Windows 98
(First Release)” on page 124.
If you don’t see TCP/IP in the list, continue
with the next step.
3. Click the Add button.
4. When you see the screen on the right, select
Protocol from the list and click the Add
button. The Select Network Protocol
window appears.