Epson GT-30000 - Manual (Page 83)

Network Scanning
77
4. Select Specify a location , if necessary.
Then browse to EPSON\English\
WIN98 on your CD-ROM drive. Then
click Next .
(The example on the right shows “E” as
the CD-ROM drive. Your CD-ROM
drive letter may be different.)
5. Follow the instructions on the screen.
If you see a message asking for your Windows 98 CD-ROM, insert it and click
OK. (Or, select Specify a location , click Browse , and locate the Windows 98
source files on your hard drive. Then click OK .) When prompted, reinsert your
scanner software CD-ROM.
6. When you see the Screen Calibration window,
move the slider right or left until the stripes
match as closely as possible. (The stripes will
not match perfectly. The recommended setting
is 1.8.) Then click
OK .
The EPSON Screen Calibration Utility
calibrates the preview image you see in your
EPSON TWAIN HS driver to match your
monitor settings
.
You won’t need to change the screen calibration as long as you continue
to use the same display. If you need to recalibrate your screen at a later
time, double-click the Scanners and Cameras icon in your Windows
Control Panel to open the Scanners and Cameras Properties window. In
the Devices tab, make sure EPSON GT-30000 is selected, and then click
the Properties button to display the EPSON GT-30000 Properties window.
Click the Utility tab, and then click the Screen Calibration Utility button.
7. When installation is complete, click Finish to return to the Windows desktop.