Epson GT-30000 - Manual (Page 47)

Installing the Software
41
Installing the Software for Windows 95
Follow the instructions in this section to install your EPSON GT-30000 scanner
driver and other software on your scanner software CD-ROM for stand-alone
scanning. Before you begin installing software, make sure you recalibrate your
monitor to factory specifications. (See your monitor documentation for instructions.)
If you want to use your scanner on a network, go to Chapter 4, “Network Scanning,”
instead.
You may be asked to insert your Windows CD-ROM during this procedure.
Make sure you have your Windows CD-ROM available, or know where to find the
Windows source files on your hard drive. If you need help locating your source files,
contact your computer manufacturer.
1. Turn on your scanner first, then turn
on your computer. When you see the
window on the right, click
Next .
2. Click Other Locations .