Epson GT-30000 - Manual (Page 46)

40
Installing the Software
Selecting the GT-30000 as Your Default Scanner
(Windows 98)
If you have more than one scanner connected to your computer and you’re running
Windows 98, you can set up the EPSON GT-30000 as your default scanner.
1. Open the Windows Control Panel and
double-click the Scanners and
Cameras icon to open the Scanners and
Cameras Properties window.
2. Select EPSON GT-30000 , if necessary,
and click the Properties button.
3. Click the Utility tab. Make sure Select
as default scanner for EPSON TWAIN
HS
is checked, and then click OK .
4. Click OK to close the Scanners and
Cameras Properties window.
The default scanner remains in effect until
you use this procedure to change it again.