Epson GT-30000 - Manual (Page 40)

34
Installing the Software
If you’re done installing software, remove the EPSON GT-30000 Scanning Tools
CD-ROM and restart your computer. Then follow the instructions in the next
section to make sure your scanner is operating properly.
If you want to install the ISIS driver, PixTools QuickScan, or Presto! PageManager
continue with the instructions under “Installing Additional Software” on page 49.
Testing the Scanner’s Operation (Windows 2000)
Follow these steps to test scanner operation:
1. Open the Windows Control Panel and
double-click the Scanners and
Cameras icon to open the Scanners
and Cameras Properties window.
2. Make sure EPSON GT-30000 is
selected, and then click the Properties
button.
3. Click the Test Scanner or Camera
button. If the scanner is operating
properly, a Test Successful message
displays. Click
OK to close the message.
Device Ready appears next
to Status .
4. Click OK to close the Properties
window.