Epson GT-30000 - Manual (Page 67)

How to Scan
61
Follow these steps to assign an application to the
a Start button:
1. Open the Windows Control Panel
and double-click the Scanners
and Cameras icon.
2. Select EPSON GT-30000 , if
necessary, and click Properties . If
you are running Windows Me,
double-click the
EPSON
GT-30000 icon.
3. Click the Events tab.
4. Make sure Start Button appears
in the Scanner events box, then
deselect any applications you
don’t want to use in the Send to
this application list. When you
finish, a check mark should appear
only beside the application that
you want to assign to the
a Start
button.
5. Click OK to close the EPSON
GT-30000 Properties window,
then click
OK again to close the
Scanners and Cameras Properties window.
Press the scanner’s
a Start button to have EPSON TWAIN HS started and the
document scanned into the assigned application.
You can disable the a Start button by clicking the Disable device events
checkbox on the Events tab.