Epson GT-30000 - Manual (Page 34)

28
Installing the Software
Testing the Scanner’s Operation (Windows Me)
Follow these steps to test scanner operation:
1. Open the Windows Control Panel and
double-click the Scanners and
Cameras icon to open the Scanners and
Cameras Properties window.
2. Double-click the EPSON GT-30000
icon to display the Properties window.
3. Click the General tab, then click the
Test Scanner or Camera button. If
the scanner is operating properly, a Test
Successful message displays. Click
OK to
close the message. Device Ready
appears next to Status on the Properties
window.
4. Click OK to close the Properties
window.