Oki MC363dn - Manual (Page 47)

Configuring the Scan to Computer and Remote Scan > 47
Using Network Configuration
Network Configuration is a tool to set in advance when executing Scan To Computer. In
addition, if the information including the device and IP address of the computer, etc. is
changed when performing network scan, the setting value can be changed by this tool.
When installing ActKey, Network Configuration is also installed simultaneously.
Network Configuration will be automatically run when you log on windows if you select it in
task tray menu.
When starting Network Configuration, the scanner driver installed in the computer is
displayed.
> Method to add a new network scanner
To add a new network scanner, select Add Scanner from the Scanner menu, and
select scanner driver name of the added scanner.
> Method to change a scanner driver name
When a scanner driver name has been changed, select Edit Driver Name from
the Scanner menu and then change the scanner driver name.
> Method to change the setting information of the machine
When the IP address of the machine and port number of the machine have been
changed, start Network Configuration and then select Edit Scanner from the
Scanner menu.
The setting value set in the current computer is displayed, and then change the IP
address and port number of the machine.