RISCO Group Risco Services - Manual (Page 20)

Risco Services Installation Manual
Uncontrolled when printed © RISCO Group 13
Figure 11: Change Configuration for RMAC Service
16. Enter the machine name where RACError queue is created. For example, if the error queue is
created on 01hw182221, then enter 01HW182221 in the field.
17. In the Queue: RACExecServer field, enter the machine name where RACExecServer queue is
created.
Note: If the queues are created on the same machine where RMAC Web Service is installed, then
leave the Transport and Bus fields blank.
18. In the Application Settings area, in the OTP field, enter the machine name where OTP Service is
running.
19. In the Radius shared Secret field, enter the shared secret as configured in the Radius Server for
password authentication using OTP devices.
Note: In the OTP field, do not write @machine name, write just the machine name. For example, if
your OTP service is running on 01Hw182221, then enter 01HW182221 in the field.
20. Click Next. The Change Configuration RMAC Execution Server dialog box appears.