RISCO Group Risco Services - Manual (Page 26)

Risco Services Installation Manual
Uncontrolled when printed © RISCO Group 19
Figure 17: Change Configuration for AMAC Execution Server
44. In the Error Queue AMACError field, enter the machine name where the AMACError queue is
created. For example, if the AMACError queue is created on 01HW182236, then enter
01HW182236 in the field.
45. In the Queue: AMACDistributorDataBus field, enter the machine name where AMAC Distributor
Databus queue is installed.
46. In the Queue: AMACDistributorDataBus(Event) field, enter the machine name where AMAC
Distributor Databus (Event) queue is installed. In case only one distributor is used, enter the
machine name provided for Queue: AMACDistributorDataBus field.
47. In the Queue: CRCC field, enter the machine name where Crystal Report Communication
Component (CRCC) is installed.
48. In the Queue: RACExecServer field, enter the machine name where the RMAC Execution Service is
installed.
49. In the Queue: AMACWCFServer field, enter the machine name where the AMAC WCF service is
installed.
50. In case Failover Cluster is configured, provide the machine name where cluster is running for
AMAC Execution Server in both the fields in the Failover cluster settings area.
51. Click Next. The Change Configuration for AMAC Worker dialog box appears.