RISCO Group Risco Services - Manual (Page 25)

Risco Services Installation Manual
Uncontrolled when printed © RISCO Group 18
Figure 16: Change Configuration for AMAC Service
39. In the Error Queue: AMACError field, enter the machine name where the AMACError queue is
created. For example, if the AMACError queue is created on 01HW182236, then enter
01HW182236 in the field.
40. In the Queue: AMACExecServer field, Enter the machine name where the AMAC Execution Server
is installed.
41. In the Application Settings area, enter the IP Address of the machine, where Safeword OTP server
or Radius server is installed in the OTP field.
42. In the Radius shared Secret field, enter the shared secret as configured in the Radius Server for
Password authentication using OTP devices.
43. Click Next. The Change Configuration for AMAC Execution Server dialog box appears.