RISCO Group Risco Services - Manual (Page 53)

Risco Services Installation Manual
Uncontrolled when printed © RISCO Group 46
3
Starting the Services
After you have installed the services as per your requirement, you need to start them for running
successfully.
To start the services:
1. Go to the machine where you have installed the Risco Services.
2. Go to Start → My Computer → right-click Manage. The Computer Management window
appears.
3. Click Services and Applications
→ Services. The list of services appears. The names of the
services that you installed on this machine appear in this list.
Figure 48: Risco Services
4. Click the service name and click the Start link available in the left-area of the window. For example,
to start AMAC Distributor service, select the AMAC Distributor service from the list of services and
click Start. AMAC Distributor service is successfully started.
Note: If the Start link is not available, right-click and click Properties. In the General tab, select the
Startup Type as Automatic. Now, you can start the service. In case you have installed on
different machines, you need to follow the same steps on each machine.