RIGOL DSG3000 Series - Manual (Page 114)

RIGOL Chapter 2 Command System
2-94 DSG3000 Programming Guide
[:SOURce]:SWEep:STEP:STARt:LEVel:STEP
Syntax [:SOURce]:SWEep:STEP:STARt:LEVel:STEP <value>
[:SOURce]:SWEep:STEP:STARt:LEVel:STEP?
Description Set the start level step of the sweep.
Query the start level step of the sweep.
Parameter Name Type Range Default
<value> Real 0.01dB to 100dB 1dB
Explanation  When <value> is set in "Number" form, the default unit is dB. Besides,
<value> can also be set in "Number + Unit" form, for example, 20dB.
 The default unit of the return value is dB.
 After setting the start level step, you can use the up/down direction keys or
knob to modify the start level at the current step. At this point, you can query
or set the start level using the [:SOURce]:SWEep:STEP:STARt:LEVel
command.
Return Format The query returns the start level step of the sweep, for example, 20.00.
Example :SWE:STEP:STAR:LEV:STEP 20
:SWE:STEP:STAR:LEV:STEP?
Related
Command
[:SOURce]:SWEep:STEP:STARt:LEVel
[:SOURce]:SWEep:STEP:STOP:FREQuency
Syntax [:SOURce]:SWEep:STEP:STOP:FREQuency <value>
[:SOURce]:SWEep:STEP:STOP:FREQuency?
Description Set the stop frequency of the sweep.
Query the stop frequency of the sweep.
Parameter Name Type Range Default
<value> Real 9kHz to 6GHz 2GHz
Explanation  When <value> is set in "Number" form, the default unit is Hz. Besides,
<value> can also be set in "Number + Unit" form, for example, 4MHz.
 The default unit of the return value is Hz.
 After setting the stop frequency, you can use the up/down direction keys or
knob to modify the stop frequency at the current step. At this point, you can
query or set the current step using the
[:SOURce]:SWEep:STEP:STOP:FREQuency:STEP command.
Return Format The query returns the stop frequency of the sweep, for example, 4000000.
Example :SWE:STEP:STOP:FREQ 4MHz
:SWE:STEP:STOP:FREQ?
Related
Command
[:SOURce]:SWEep:STEP:STOP:FREQuency:STEP