RIGOL DSG3000 Series - Manual (Page 47)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-27
[:SOURce]:FREQuency:OFFSet
Syntax [:SOURce]:FREQuency:OFFSet <value>
[:SOURce]:FREQuency:OFFSet?
Description Set the RF frequency offset.
Query the RF frequency offset.
Parameter Name Type Range Default
<value> Real -20GHz to 20GHz 0Hz
Explanation  When <value> is set in "Number" form, the default unit is Hz, for example,
20000. In addition, <value> can also be set in "Number + Unit" form, for
example, 20kHz.
 The default unit of the return value is Hz.
 After the RF frequency offset is set, you can use the up/down direction keys or
knob to modify the offset at the current step. You can query or set the current
step using the [:SOURce]:FREQuency:OFFSet:STEP command.
 When the frequency offset is 0 Hz, the frequency displayed in the interface
(namely the setting frequency) is equal to the actual output frequency.
 When the frequency offset is not 0 Hz, the output frequency is determined by
the setting frequency and frequency offset. The three parameters satisfy the
equation: setting frequency (display frequency) = output frequency +
frequency offset. You can use the [:SOURce]:FREQuency command to query
and set the RF frequency.
Return Format The query returns the RF frequency offset, for example, 20000.
Example :FREQ:OFFS 20kHz
:FREQ:OFFS?
Related
Commands
[:SOURce]:FREQuency:OFFSet:STEP
[:SOURce]:FREQuency