RIGOL DSG3000 Series - Manual (Page 36)

RIGOL Chapter 2 Command System
2-16 DSG3000 Programming Guide
[:SOURce]:AM:DEPTh
Syntax [:SOURce]:AM:DEPTh <value>
[:SOURce]:AM:DEPTh?
Description Set the AM modulation depth.
Query the AM modulation depth.
Parameter Name Type Range Default
<value> Integer 0 to 100 50
Explanation
 When selecting "Int" modulation source, the AM modulation depth (
a
m
) and
amplitude difference (
sb
ΔP ) between the carrier and sidebands satisfy the
following relation:
a sb
m
ΔP
lg 20 6
− = .
 <value> can also be expressed as percentage, for example, 80%.
 After the modulation depth is set, you can use the up/down direction keys or
knob to modify the modulation depth at the current step. You can query or set
the current step using the [:SOURce]:AM:DEPTh:STEP[:INCRement]
command.
Return Format The query returns the modulation depth, for example, 80.00.
Example :AM:DEPT 80
:AM:DEPT?
Related
Command
[:SOURce]:AM:DEPTh:STEP[:INCRement]
[:SOURce]:AM:DEPTh:STEP[:INCRement]
Syntax [:SOURce]:AM:DEPTh:STEP[:INCRement] <value>
[:SOURce]:AM:DEPTh:STEP[:INCRement]?
Description Set the AM modulation depth step.
Query the AM modulation depth step.
Parameter Name Type Range Default
<value> Integer 0.1 to 50 10
Explanation  <value> can also be expressed as percentage, for example, 0.15%.
 After the modulation depth step is set, you can use the up/down direction keys
or knob to modify the modulation depth at the current step. At this point, you
can query or set the modulation depth using the [:SOURce]:AM:DEPTh
command.
Return Format The query returns the modulation depth step, for example, 0.15.
Example AM:DEPT:STEP:INCR 0.15
AM:DEPT:STEP:INCR?
Related
Command
[:SOURce]:AM:DEPTh