RIGOL DSG3000 Series - Manual (Page 73)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-53
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STARt:STEP
Syntax [:SOURce]:LFOutput:SWEPtsine:FREQuency:STARt:STEP <value>
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STARt:STEP?
Description Set the start frequency step of sweep-sine.
Query the start frequency step of sweep-sine.
Parameter Name Type Range Default
<value> Real 100mHz to 500kHz 1kHz
Explanation  When <value> is set in "Number" form, the default unit is Hz, for example,
3000. Besides, <value> can also be set in "Number + Unit" form, for example,
3kHz.
 The default unit of the return value is Hz.
 After setting the start frequency step, you can use the up/down direction keys
or knob to modify the start frequency at the current step. At this point, you can
query or set the start frequency using the
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STARt command.
Return Format The query returns the start frequency step of sweep-sine, for example, 3000.
Example :LFO:SWEP:FREQ:STAR:STEP 3kHz
:LFO:SWEP:FREQ:STAR:STEP?
Related
Command
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STARt
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STOP
Syntax [:SOURce]:LFOutput:SWEPtsine:FREQuency:STOP <value>
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STOP?
Description Set the stop frequency of sweep-sine.
Query the stop frequency of sweep-sine.
Parameter Name Type Range Default
<value> Real 100mHz to 1MHz 100kHz
Explanation  When <value> is set in "Number" form, the default unit is Hz, for example,
5000. Besides, <value> can also be set in "Number + Unit" form, for
example, 5kHz.
 The default unit of the return value is Hz.
 After setting the stop frequency, you can use the up/down direction keys or
knob to modify the frequency at the current step. At this point, you can query
or set the current step using the
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STOP:STEP command.
Return Format The query returns the stop frequency of sweep-sine, for example, 5000.
Example :LFO:SWEP:FREQ:STOP 5kHz
:LFO:SWEP:FREQ:STOP?
Related
Command
[:SOURce]:LFOutput:SWEPtsine:FREQuency:STOP:STEP