RIGOL DSG3000 Series - Manual (Page 115)

Chapter 2 Command System RIGOL
DSG3000 Programming Guide 2-95
[:SOURce]:SWEep:STEP:STOP:FREQuency:STEP
Syntax [:SOURce]:SWEep:STEP:STOP:FREQuency:STEP <value>
[:SOURce]:SWEep:STEP:STOP:FREQuency:STEP?
Description Set the stop frequency step of the sweep.
Query the stop frequency step of the sweep.
Parameter Name Type Range Default
<value> Real 10mHz to 1GHz 100MHz
Explanation  When <value> is set in "Number" form, the default unit is Hz. Besides,
<value> can also be set in "Number + Unit" form, for example, 3kHz.
 The default unit of the return value is Hz.
 After setting the stop frequency step, you can use the up/down direction keys
or knob to modify the stop frequency at the current step. At this point, you can
query or set the stop frequency using the
[:SOURce]:SWEep:STEP:STOP:FREQuency command.
Return Format The query returns the stop frequency step of the sweep, for example, 3000.
Example :SWE:STEP:STOP:FREQ:STEP 3kHz
:SWE:STEP:STOP:FREQ:STEP?
Related
Command
[:SOURce]:SWEep:STEP:STOP:FREQuency