RIGOL DSG3000 Series - Manual (Page 96)

RIGOL Chapter 2 Command System
2-76 DSG3000 Programming Guide
[:SOURce]:PULM:TRIGger:DELay
Syntax [:SOURce]:PULM:TRIGger:DELay <value>
[:SOURce]:PULM:TRIGger:DELay?
Description Set the pulse trigger delay.
Query the pulse trigger delay.
Parameter Name Type Range Default
<value> Real 10ns to 170s 100us
Explanation  You can use this command to set the delay between the start of the external
modulating signal and the start of #1 pulse of the pulse modulating signal
when "Int" modulation source is selected and "Ext Trig" mode is selected.
 When <value> is set in "Number" form, the default unit is s. Besides,
<value> can also be set in "Number + Unit" form, for example, 30ns.
 The default unit of the return value is s.
 After setting the trigger delay, you can use the up/down direction keys or
knob to modify the trigger delay at the current step. At this point, you can
query or set the current step using the
[:SOURce]:PULM:TRIGger:DELay:STEP command.
Return Format The query returns the trigger delay, for example, 3.
Example :PULM:TRIG:DEL 3 /*Set the trigger delay to 3s*/
:PULM:TRIG:DEL?
Related
Commands
[:SOURce]:PULM:SOURce
[:SOURce]:PULM:TRIGger:DELay:STEP
[:SOURce]:PULM:TRIGger:MODE