TA Triumph-Adler CLP 4532 - Manual (Page 100)

Options
3-4
DF-730 Document Finisher
Provides finishing for about 1,000 sheets at a time.
Also provides staple and offset functions. It is installed
to the left side of the printer.
BF-710 Booklet Folder
Provides automatic booklet stitching and folding functions. It is installed in the DF-710 Document
Finisher to the left side of the printer.
MT-710 Mail Box
It is installed in the DF-710 Document Finisher. Each user can output documents to a specified tray
when the printer is shared.
PH-5A/5C/5D Punch Unit
It mounts to the DF-710 Document Finisher and can punch holes automatically in printed out paper.
Other Options
Hard Disk Unit
Enables the electronic sorting and job retention functions. To be inserted into the HDD slot designed
for it on the main circuit board of the printer.
CompactFlash (Memory) Card
This is a microchip card that may contain option fonts, macros, and forms. Insert the memory card
into the memory card slot located on the right of the printer. See your dealer for purchasing
information regarding the memory cards that are best suited for use with this printer.
Memory DIMM
See your dealer for purchasing information of the DIMM that are best suited for use with this printer.
Refer to Expansion Memory Modules on page 3-5.
Data Security Kit (D)
Activates the HDD security function. This kit is attached to the printer by the service representative.
For details on the HDD security function, refer to Data Security Kit (D) Operation Guide.