TA Triumph-Adler CLP 4532 - Manual (Page 63)

Using the Operation Panel
2-47
6 Press [OK]. Processing appears and the printing of the list starts.
The printout (example above) includes the following information:
When the list of file names (partition list) for the memory card is printed, the display returns to
Ready
.
Using the Optional Hard Disk
Installing the optional hard disk into the printer allows you to perform the following operations on the
hard disk.
• Reading data
• Writing data
• Deleting data
• Formatting hard disk
• Printing a list of data names (partitions)
When an optional hard disk is inserted into the printer for the first time, it must be formatted before
use. If the hard disk is not formatted, the >Format menu will automatically appear on the display.
The operations of the hard disk are the same as those of the memory card. Refer to the relevant
sections in Using the CompactFlash (Memory) Card on page 2-42.
When data is written to the hard disk, the name automatically given to the corresponding file will be
DataH001 (for the 1st file), DataH002 (for the 2nd file), DataH003 (for the 3rd file), etc.
Item Description
Device Name/Number MEMORY CARD/A is indicated for the memory card.
Capacity The total capacity of the memory card in kilobytes.
Used Space The total size of the data stored in the memory card in kilobytes.
Free Space The size of the capacity remaining in the memory card for storing
further data, including the amount of memory that the printer uses
for its system.
Current terminate string Terminate string used when writing to the memory card.
Write Protect Write protect status when writing to the memory card.
Partition Name The name of the written data assigned automatically by the printer.
Partition Size The size of the written data in bytes.
Partition Type The type of the written data i.e., whether it is host data (Data) or
font data (Font).
Partition Information
Device Information
PARTITION LIST