TA Triumph-Adler DC 2015 - Manual (Page 14)

3-1
1
2
3
4
CHAPTER 3 PREPARATIONS BEFORE USE
1. How to load paper
Paper can be loaded into the drawer and the multi-bypass.
(1) Precautions for loading paper
After unpacking the paper, fan it several times and then load into the
tray.
(2) Loading paper into the drawer
Up to 250 sheets of standard paper (75 or 80 g/m 2 /standard paper as
specified by our company) or colored paper can be loaded into the
drawer.
(Inch specifications)
* The drawer can be set to hold paper of any desired size from 11" x
17" to 5 1/2" x 8 1/2".
(Metric specifications)
* The drawer can be set to hold paper of any desired size from A3 to
A5 (vertical).
Pull the drawer out toward you as far as it will go.
* If optional drawers are installed, do not pull more than one
drawer out at a time.
Press the drawer bottom plate down and fix it there.
Hold the width adjustment lever and move it to align the
width guide with the required paper width.
Paper sizes are marked inside the drawer.
Hold both sides of the length adjustment plate and move it to
align with the required paper length.