TA Triumph-Adler DC 2015 - Manual (Page 20)

1 3
2
4-1
4
CHAPTER 4 BASIC OPERATIONS
1. Basic copying procedure
1. Warm-up
Turn the main switch ON (|). When warm-up ends, the Start indicator
lights.
* If you set an original and press the Start key before warm-up ends,
copying automatically starts at the end of warm-up.
2. Setting originals
Set the original on the platen. When setting the original, adjust its
position using the original size scales based on the left rear position.
3. Function selection
Select from the various function of the copier.
* See pages 4-3 to 5-6 for details about the copy functions.
4. Paper size selection
When copying onto paper of the same size as the original, check that
the APS indicator is lit. If not, press the auto mode selection key to
light the indicator. When copying onto paper of a different size from
the original without changing the size of the image, press the Paper
Select key for the desired paper size and press the Manual key.
* The copier can be set so that the paper size is always to be set
manually. (See “Paper selection” on page 6-5.)
* A drawer (paper feed drawer) to be selected automatically without
setting any originals can be specified. (See “Default drawer” on page
6-5.)
* The original size and paper size are not automatically selected on
some models. Select the original size using the Original key and
select the paper size using the Paper Select key.