TA Triumph-Adler DC 2015 - Manual (Page 22)

CHAPTER 4 BASIC OPERATIONS
4-3
1
2
3
1
2
3
2. Enlargement/reduction
(1) Auto magnification selection mode
The original image is enlarged/reduced automatically according to the
selected paper size.
Check that the AMS indicator is lit. If not, press the auto
mode selection key to light the indicator.
Set the original(s).
The size of the original will be automatically detected and the
paper of the same size as the original will be selected.
* The original size is not automatically selected on some
models. Select the original size using the Original key.
Press the Paper Select key to specify the paper size.
The magnification ratio indication flashes and then changes
to the indication of the number of copies.
* Copying will start when the Start key is pressed.
(2) Zoom copy
The zoom ratio can be set to any value from 50 to 200% in 1%
increments.
Set the original(s).
Press the Zoom (+) or Zoom (-) key to change the displayed
zoom ratio.
“%” lights on the magnification display.
NOTE
After pressing the Zoom (+) or Zoom (-) key, the zoom ratio can also
be entered using the numeric keys.
Press the Recall % key. The zoom ratio will be set and the
display indication changes from the magnification to the
number of copies.
* If a zoom ratio other than 100% is set, the Recall %
indicator will light.
* Press the Paper Select key to change the paper size.
* Copying will start when the Start key is pressed.