TA Triumph-Adler P-C3565i MFP - Manual (Page 145)

8-9
Fax Settings > Default fax settings
TX/RX Restriction
This function allows you to send or receive originals only when communication requirements are met.
Transmission Restriction (page 8-10)
Forward Settings
When you have received a fax, you can forward the received image to other faxes and computers or specify a number of
copies.
Forward Settings (page 5-2)
New Destination Entry(FAX)
ECM RX Set whether ECM RX is performed.
ECM is a communication mode specified by the ITU-T (International Telecommunication Union)
that retransmits data when an error occurs. Fax machines that have ECM mode check for
errors as they communicate, preventing distortion of the image due to noise on the line and
other conditions.
Value : On, Off
NOTE
When there is a large amount of noise on the line, communication may take slightly longer than
when [Off] is selected.
RX Start Speed Change the RX Start Speed.
When communication conditions are bad, the fax may not be received correctly. In that case,
set a lower RX Start Speed.
Value : 9600bps, 14400bps, 33600bps
NOTE
Normally this should be used with the default setting.
Item Description
New Destination Entry(FAX) Select whether to permit direct entry of destination. When this option is set to [Prohibit],
you cannot enter the destination directly.
Value : Permit, Prohibit
Item Description