TA Triumph-Adler P-C3565i MFP User Manual
Page 39
3-8
Sending Faxes > Methods For Entering the Destination
3
Select transmission settings.
Sub address communication, encrypted transmission, transmission start speed and ECM can
be set.
It is possible to change the transmission settings by selecting [On Hook], [Sub Address] or
[Detail Settings].
4
Select [OK].
Entry of the destination finishes.
Key
Description
On Hook
Select [On Hook] to connect to the telephone line.
When the FAX number has been entered, the machine starts
dialing to the receiving system.
After selecting this key, you can dial the number of the
receiving system using the numeric keys.
Sub Address
Set this to transmit using a Sub Address.
Sub Address Transmission (page 5-14)
Detail Settings
TX Start Speed
This is set to change the transmission start speed. Select the
speed from 33,600 bps, 14,400 bps, and 9,600 bps.
NOTE
Normally this should be used with the default setting.
ECM
ECM is a communication mode specified by the ITU-T
(International Telecommunication Union) that retransmits data
when an error occurs. Fax machines that have ECM mode
check for errors as they communicate, preventing distortion of
the image due to noise on the line and other conditions.
Encrypted
Transmission
This is set when using encrypted transmission to send the
data.
NOTE
When On is selected in Entry Check for New Dest., a confirmation screen is displayed for
the entered FAX number. Re-enter the same FAX number and select [OK].
Machine’s Operation Guide
Select [Next Dest.] to enter the next fax number.
Broadcast Transmission (page 3-11)
In addition to a fax, you can include e-mail transmission and folder (SMB/FTP) transmission
to send as one job.
Machine’s Operation Guide