TA Triumph-Adler P-C3565i MFP - Manual (Page 147)

8-11
Fax Settings > Transmission Restriction
Registering Permit FAX No.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [Permit No. List]
2
Add a permit fax number.
1 Select [+].
2 Use the numeric keys to enter Permit FAX No. Up to 20 digits can be entered.
3 Select [OK].
3
To register another permit fax number, repeat Steps 2-1 to 2-3.
Prerequisites
Reception Rejection
Requirements
Reception
Rejection • Register Reject FAX numbers.*
Registering Reject FAX No. (page 8-13)
• Reception restriction settings are specified
in [Reject List] in Reception Restrictions.
Setting Reception Restriction (page 8-17)
* If there are no Reject FAX numbers registered, calls are only rejected from senders whose Local FAX
Numbers (Indicates local FAX information entries, not the actual line numbers.) are not registered.
• The sender’s Local FAX
Number is not registered.
• The sender’s Local Fax
Number matches a Reject FAX
No. registered on the machine.
NOTE
Up to 25 Permit FAX numbers can be registered.
NOTE
Select [Pause] to insert a pause (-) between numbers.
Select [Space] to enter a space.
Use [<] or [>] to move the cursor.
Selecting [Backspace] deletes the character to the left of the cursor.
System Menu/Counter.
TX/RX Restriction - Permit No. List
10:10
1/1
Menu End
6764