Solare Datensysteme Solar-Log - Manual (Page 189)

189
Reverberi
Reverberi (EDI Series)
Procedure
•
Open the inverter as shown in the inverter's instructions.
•
Connect the other inverters to each other in the same way.
•
Terminate in the last inverter.
•
Close inverters.
•
Allocate communication address
•
Recommendation: Continuous numbering from Solar-Log™, starting from 2 (not 1!). Last address at
247.
•
Setting: Using the inverter operating display
•
Procedure: Start according to the inverter's instructions