Solare Datensysteme Solar-Log - Manual (Page 231)

231
SOCOMEC
SOCOMEC Sunsys B20E
Connect the inverters to each other
•
Where to connect: Terminal strip inside the inverter
•
5-wire cabling
Procedure
•
Open the inverter according to the inverter‘s instructions.
•
Connect the other inverters to each other in the same way.
•
Terminate the last inverter according to the inverter instructions.
•
Close the inverter.
•
Communication address according to the inverter‘s instructions.
•
Recommendation: Continuous numbering starting with 1.
Address range 1 - 255.