PLANET GS-4210-8P2T2S - Manual (Page 41)

User’s Manual of GS-4210-8P2T2S
The page includes the following fields:
Object Description
 Save Confiuration to
FLASH Click to save the configuration. For more detailed information, please refer to
chapter 4.1.2
 Restore to Default Click to reset switch in default parameter. For more detailed information, please
refer to chapter 4.15.1
4.1.2 Configuration Manager
The system file folder contains configuration settings. The screen in Figure 4-1-7 appears.
Figure 4-1-7 Save Button Screenshot
The page includes the following fields:
Object Description
 Running Configuration Refers to the running configuration sequence use in the switch. In switch, the
running configuration file stores in the RAM. In the current version, the running
configuration sequence running-config can be saved from the RAM to FLASH by
saving “ Source File = Running Configuration” to “Destination File = Startup
Configuration”, so that the running configuration sequence becomes the startup
configuration file, which is called configuration save. To prevent illicit file upload
and easier configuration, switch mandates the name of running configuration file
to be running-config.
 Startup Configuration Refers to the configuration sequence used in switch startup. Startup
configuration file stores in nonvolatile storage, corresponding to the so-called
configuration save. If the device supports multi-config file, name the configuration
file to be .cfg file, the default is startup.cfg. If the device does not support
multi-config file, mandates the name of startup configuration file to be
startup-config.
 Backup Configuration The backup configuration is empty in FLASH; please save the backup
41