2 led indications – PLANET WGSW-20160HP User Manual
Page 32
User’s Manual of WGSW-20160HP
■ Console Port
The console port is a DB9, RS-232 male serial port connector. It is an interface for connecting a terminal directly. Through
the console port, it provides rich diagnostic information includes IP Address setting, factory reset, port management, link
status and system setting. Users can use the attached RS-232 cable in the package and connect to the console port on the
device. After the connection, users an run any terminal emulation program (Hyper Terminal, ProComm Plus, Telix, Winterm
and so on) to enter the startup screen of the device.
2.1.2 LED Indications
The front panel LEDs indicates instant status of power and system status, fan status, port links / PoE In-Use, data activity; helps
monitor and troubleshoot when needed.
Figure 2-2
shows the LED indications of the Managed Switch.
WGSW-20160HP LED Indication
Figure 2-2:
WGSW-20160HP LED at Front Panel
■ System
LED
Color
Function
PWR
Green
Lights to indicate that the Switch has power.
SYS
Green
Lights to indicate the system is working.
■ Alert
LED
Color
Function
FAN1
Green
Lights
to indicate that the FAN1 failure.
FAN2
Green
Lights
to indicate that the FAN2 failure.
Per 10/100/1000Mbps port with PoE interfaces (Port-1 to Port-16)
LED
Color
Function
Lights:
To indicate the link through that port is successfully established at
10/100/1000Mbps.
LNK/ACT
Green
Blink:
To indicate that the Switch is actively sending or receiving data over that port.
Lights
: To indicate the port is providing 56V DC in-line power.
PoE In-Use
Orange
Off
:
To indicate the connected device is not a PoE Powered Device (PD).
■ Per 10/100/1000Base-T Combo Port (Port -17 to Port-20)
LED
Color
Function
Lights:
To indicate the link through that port is successfully established at 1000Mbps.
1000
LNK/ACT
Green
Blink:
To indicate that the Switch is actively sending or receiving data over that port.
Lights
: To indicate the link through that port is successfully established at 10Mbps or
100Mbps.
10 / 100
LNK / ACT
Orange
Blink:
To indicate that the Switch is actively sending or receiving data over that port.
32