PLANET WGSW-20160HP - Manual (Page 464)

User’s Manual of WGSW-20160HP
LLDPMED Policy Add
Description:
Adds a policy to the list of polices.
Syntax:
LLDPMED policy add <policy_type> [tagged|untagged] [<vlan_id>] [<l2_priority>] [<dscp>]
Parameters:
<policy_type> : The policy_type parameter takes the following values:
voice : Voice for use by dedicated IP Telephony handsets and other similar appliances supporting interactive
voice services. These devices are typically deployed on a separate VLAN for ease of deployment and
enhanced security by isolation from data applications
voice_signaling : Voice Signaling (conditional) for use in network topologies that require a different policy for the
voice signaling than for the voice media.
guest_voice : Guest Voice to support a separate limited feature-set voice service for guest users and
visitors with their own IP Telephony handsets and other similar appliances supporting
interactive voice services.
guest_voice_signaling : Guest Voice Signaling (conditional) for use in network topologies that require a different policy
for the guest voice signaling than for the guest voice media.
softphone_voice : Softphone Voice for use by softphone applications on typical data centric devices, such as
PCs or laptops. This class of endpoints frequently does not support multiple VLANs, if at
all,and are typically configured to use an untagged VLAN or a single tagged data specific
VLAN.
video_conferencing : Video Conferencing for use by dedicated Video Conferencing equipment and other similar
appliances supporting real-time interactive video/audio services.
streaming_video : Streaming Video for use by broadcast or multicast based video content distribution and other
similar applications supporting streaming video services that require specific network policy
treatment. Video applications relying on TCP with buffering would not be an intended use of
this application type.
video_signaling : Video Signaling (conditional) for use in network topologies that require a separate policy for
the video signaling than for the video media.
tagged : The device is using tagged frames
unragged : The device is using untagged frames
<vlan_id> : VLAN id
<l2_priority> : This field may specify one of eight priority levels (0 through 7), as defined by IEEE 802.1D-2004 [3].
<dscp> : This field shall contain the DSCP value to be used to provide Diffserv node behavior for the specified
application type as defined in IETF RFC 2474 [5]. This 6 bit field may contain one of 64 code point values
(0 through 63). A value of 0 represents use of the default DSCP value as defined in RFC 2475.
464