PLANET WGSW-20160HP - Manual (Page 485)

User’s Manual of WGSW-20160HP
QoS DSCP EgressRemap
Description:
Set or show DSCP egress remap table. This table is used if the port egress remarking mode is 'remap' and the purpose is
to map the classified DSCP to a new DSCP value.
Syntax:
QoS DSCP EgressRemap [<dscp_list>] [<dpl_list>] [<dscp>]
Parameters:
<dscp_list> : DSCP (0-63) list or 'all'
<dscp> : Egress remapped DSCP: 0-63, BE, CS1-CS7, EF or AF11-AF43
QoS Port Storm Unicast
Description:
Set or show the port storm rate limiter for unicast frames.
Syntax:
QoS Storm Unicast [enable|disable] [<packet_rate>]
Parameters:
<port_list> : Port list or 'all', default: All ports
enable : Enable storm policing of unicast frames
disable : Disable storm policing of unicast frames
<rate> : Rate in kbps or fps (100-13200000)
kbps : Unit is kilo bits per second
fps : Unit is frames per second
Default Setting:
disable
485