5 auto-negotiation – PLANET WGSW-20160HP User Manual
Page 530
Advertising
User’s Manual of WGSW-20160HP
530
7.5 Auto-Negotiation
The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible bandwidth
when a connection is established with another network device (usually at Power On or Reset). This is done by detect the modes
and speeds at the second of both device is connected and capable of, both 10Base-T and 100Base-TX devices can connect
with the port in either Half- or Full-Duplex mode. 1000Base-T can be only connected in Full-duplex mode.
Advertising