PLANET WGSW-20160HP - Manual (Page 436)

User’s Manual of WGSW-20160HP
Security Network ARP Inspection Port Mode
Description:
Set or show the ARP Inspection port mode.
Syntax:
Security Network ARP Inspection Port Mode [<port_list>] [enable|disable]
Parameters:
<port_list> : Port list or 'all', default: All ports
enable : Enable ARP Inspection port
disable : Disable ARP Inspection port
(default: Show ARP Inspection port mode)
Default Setting:
Disable
Security Network ARP Inspection Entry
Description:
Add or delete ARP inspection static entry.
Syntax:
Security Network ARP Inspection Entry [<port_list>] add|delete <vid> <allowed_mac> <allowed_ip>
Parameters:
<port_list> : Port list or 'all', default: All ports
add : Add new port ARP inspection static entry
delete : Delete existing port ARP inspection static entry
<vid> : VLAN ID (1-4095)
<allowed_mac> : MAC address ('xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx', x is a hexadecimal digit), MAC
address allowed for doing ARP request
<allowed_ip> : IPv4 address (a.b.c.d), IP address allowed for doing ARP request
436