PLANET WGSW-20160HP - Manual (Page 33)

User’s Manual of WGSW-20160HP
■ Per 100/1000Mbps SFP Combo Interface (Port -17 to Port-20)
LED Color Function
Lights . To indicate the port is successfully established at 1000Mbps.
1000 LNK/ACT Green
Blink : To indicate that the Switch is actively sending or receiving data over that port.
Lights : To indicate the port is successfully established at 100Mbps.
100 LNK/ACT Orange
Blink : To indicate that the Switch is actively sending or receiving data over that port.
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figure 2-3 shows the rear panel of the Managed Switch.
WGSW-20160HP Rear Panel
Figure 2-3: Rear Panel of WGSW-20160HP
■ AC Power Receptacle
For compatibility with electric service in most areas of the world, the Managed Switch’s power supply automatically adjusts
to line power in the range 100-240V AC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch. Plug the other
end of the power cord into an electric service outlet then the power will be ready.
Power Notice:
The device is a power-required device, it means, it will not work till it is powered. If your networks should
active all the time, please consider using UPS (Uninterrupted Power Supply) for your device. It will
prevent you from network data loss or network downtime.
In some area, installing a surge suppression device may also help to protect your Managed Switch from
being damaged by unregulated surge or current to the Switch or the power adapter.
33