Ems management system – PLANET EPL-2000 User Manual
Page 31
User’s Manual of EPL-2000
4. EMS Management System
PLANET GEPON solutions include the OLT EPL-2000 and ONUs -- EPN-102 and EPN-103. The following information
introduces the software configuration.
This document explains how to use the EMS Utility for the purpose of evaluating the functionality and usability of Host Interface
Protocol. This manual assumes that the reader has a technical background and a base level of understanding regarding the
basic operation of PON equipment. The EMS Utility is a demonstration package, intended for evaluation purposes only.
Organization of the EMS Utility
The screen real estate used by the EMS Utility is divided into three sash windows and one EMS toolbar.
The upper left panel displays the entities that may be managed by the Host Interface, including the OLT, ONUs and
Logical Links. This sash window will be referred to as the Element Status Window.
Left clicking on an entity with the mouse will open a tabbed panel in the upper right sash window that may be used to
manage the entity. This sash window will be referred to as the Entity Management Window.
The bottom sash window is used for the purpose of logging the host interface message that is sent and received by the
EMS Utility, and will be referred to as the Message Log.
If the OLT is running normally and the ONUs register each of their LLIDs, you should see something similar to the figure. The left
handed pane shows the MAC addresses of the OLT and the ONU’s LLIDs. Depending on the number of ONUs, LLIDs, MAC
addresses, etc., you may see something slightly different. If the GUI fails to connect to the OLT, check the IP addresses of the
Host PC and the management port. Make sure you can ping the IP address assigned to the management port or uplink port.
Also verify that the Host and management IP addresses match in the GUI’s Utilities.
31