PLANET VIP-1010PT - Manual (Page 31)

High Definition PoE IP Phone (1-Line)
VIP-1010PT
- 31 -
3.17.2 Voice Message
The VIP-1010PT IP Phone can send or answer voice message. The phone will make
a “Du Du” sound, the LED light of message flashes green, and the LCD presents
“New Voice Message” on the LCD with a twinkling voice message icon.
Note: Not all servers support voice message.
Voice Message
You can leave a message when the user whom you called is busy or unavailable.
Leave a message according to the voice prompt of server, and then hang up after
leaving the message.
Set Visit account number of voice message via phone interface.
1. In the Idle, press the Menu soft key.
2. In the Idle, press the Down key on the phone keyboard to select message, press
the OK key on the phone keyboard or the Enter soft key to enter the Message
interface.
3. In the Message interface, press the Down key on the phone keyboard to select the
voice message. Press the OK key on the phone keyboard or the Enter soft key
to enter the Voice Message interface.
4. Select the Voice Message Setting.
5. Press the OK key on the phone keyboard or the Enter soft key to set account 1,
input the Visit account number of voice message ( For example, *97). Press 123
soft key to switch the input methods.
6. Press the OK key on the phone keyboard or the Save soft key to save and return
to message interface.